BROCKHAUS MEASUREMENTS - Dr. Brockhaus Messtechnik GmbH & Co. KG

www.brockhaus.com

BROCKHAUS is an international leading manufacturer of instrumentation devices and systems for the quality control and examination of magnetic materials.

About us

BROCKHAUS is an international leading manufacturer of instrumentation devices and systems for the quality control and examination of magnetic materials. Measurement of all magnetic properties in accordance with international standards.

Product program: Electrical steel tester – Power loss tester, Epstein tester, Stator tester, B/H loop tester - , Franklin Tester, Inline-measuring equipment, Thickness-, width- & hole detection instruments, Hysteresisgraphs, Gaussmeter, Fluxmeter, Coil systems, Magnetizing devices, Measuring & calibration service, Reference samples accredited acc. DIN EN ISO/IEC 17025:2018.

Address
BROCKHAUS MEASUREMENTS - Dr. Brockhaus Messtechnik GmbH & Co. KG
Gustav-Adolf-Str. 4
58507 Luedenscheid
Germany

Phone: +49 2351 36440
Fax: +49 2351 364444
Internet: www.brockhaus.com

Products and services

Instrumentation devices and systems for the quality control and examination of magnetic materials. Measurement of all magnetic properties in accordance with international standards.

Product program: Electrical steel tester – Power loss tester, Epstein tester, Stator tester, B/H loop tester - , Franklin Tester, Inline-measuring equipment, Thickness-, width- & hole detection instruments, Hysteresisgraphs, Gaussmeter, Fluxmeter, Coil systems, Magnetizing devices, Measuring & calibration service, Reference samples accredited acc. DIN EN ISO/IEC 17025:2018.
Inline Measuring System EBA-CoilMap

EBA-CoilMap - Visualization of power loss
Inline measuring system for the continuous monitoring of local variations in magnetic properties across the material width & length of electrical steel coils.
• inline measurement device for annealing, inspection & slitting lines
• generating a complete map of loss values for the entire electrical steel coil
• applicable for grain-oriented and non-grain-oriented material
• technology is patented in Germany, pending in USA, Japan and China

Further reading

Electrical Steel Tester MPG 200 D

Measuring system to test soft magnetic materials. PC-based device with high end hardware fulfils requirements for internationally standardized testing of electrical steel in acc. with IEC 60404ff; enables significant short measuring cycles while at the same time providing a high resolution of up to 2.5 Msamples sampling rate. Can meet customers wishes for measurements with non-standardized forms of exciting current such as pulse-width modulations or nonsinusoidal forms of current.

Further reading

Franklin Tester FT 600

Franklin Tester for the determination of surface resistance of individual samples of electrical steel and punched parts.

The BROCKHAUS Franklin Tester FT 600 allows measuring the current which flows through the insulation coating of the samples when pressure is applied via several contacts. Especially suitable for the quality control of insulation coating. Manual or fully automatic version; preparation and execution of the measuring process according to ASTM-standard A717-01 and IEC 60404-11.

Further reading

News & Innovations

NEW: BROCKHAUS calibration laboratory is accredited according to DIN EN ISO/IEC 17025:2018

BROCKHAUS is well known as the leading manufacturer of instrumentation devices and systems for the quality control and examination of magnetic materials. Besides our well proven measuring instruments we also offer our service for calibration of samples in our calibration laboratory accredited according to DIN EN ISO/IEC 17025:2018.

  • Epstein samples acc. to IEC 60404 part 2
  • Single sheet samples acc. to IEC 60404 part 3
  • Magnetic field strength
  • Magnetic flux density
  • Specific watt loss Ps (AC)
  • Specific apparent power Ss (AC)

Get your samples calibrated and contact our DAkkS accredited calibration laboratory!

Further reading
NEW: EBA-CoilMap - Inline measurement of electrical steel coils with the visualization of power loss

The new BROCKHAUS EBA-CoilMap is an inline measuring system for the continuous monitoring of local variations in magnetic properties across the material width and length of electrical steel coils:

  • inline measurement device for annealing, inspection and slitting lines
  • generating a complete map of loss values for the entire electrical steel coil
  • applicable for grain-oriented and non-grain-oriented material
  • technology is patented in Germany, patent pending in USA, Japan and China
Further reading

Click here if you notice an image that violates copyright or privacy rights.

Get in contact
OK

We only use functionally necessary cookies and the web analysis tool Matomo in order to optimally design and continuously improve our website for you. By continuing to use our website, you agree to this. Further information and an objection possibility can be found here: Data protection